Twiflex MU Brake Calipers and Thrusters
The Twiflex MU series of disc brake calipers is the smallest in the Twiflex range and is primarily intended for light stopping and holding duties. Its design permits left or right-handed assembly.
The caliper is suitable for use with a disc thickness of 8mm, however, with a revised thruster mounting arrangement, may be used with discs 12.7mm thick. Minimum disc diameter is 150mm. A range of brake discs is available from Howdon (see Disc and Hub Assemblies).
Fixing bolt to be supplied by the customer.
For pneumatic operation use dry, filtered and non-lubricated compressed air. Pneumatic brakes require a control valve, operated either manually or by pneumatic or electrical signal.
The ratings shown on the graphs are based on fully bedded in and conditioned brake pads with a nominal friction coefficient μ = 0.4. Howdon disc brakes must be used with Twiflex asbestos free brake pads.
Effective disc radius = actual radius (m) – 0.02m.
AVAILABLE SPARES
Brake pads ( Pack of 4 ) . Part nunber 7080047 -Z-SS4
Arm Assembly – Thruster. Part No. 6640177
Arm Assembly – Slotted. Part No. 6640178
Pivot Post. Part No. 8240039
MU Spring Kit. Part No. 7902809
Please refer to the data sheets below for more information.
Data Sheets
Spring Applied
Buy your industrial brakes and spares direct from our warehouse, or talk to one of our experienced engineers today to discuss your requirements: 01453 750814 sales@howdon.co.uk